Product Description:

The AKD-P00306-NAEI-0000 digital servo drive is produced by Kollmorgen as part of the AKD Servo Drives series. It is intended for closed-loop motion tasks that require precise torque, speed, and position control. By generating pulse-width-modulated output currents from an AC mains input, the drive links higher-level PLCs with rotary or linear servo motors in packaging lines, gantry stages, and light-duty pick-and-place equipment. This arrangement supports accurate command tracking during indexing, speed changes, and repeatable positioning on compact automated axes.

The drive operates from a single- or three-phase supply of 120 / 240 Vac 1~/3~. Under continuous S1 duty, it delivers a nominal phase current of 3 Arms, which is the sustained current available to the connected motor without thermal derating. For short acceleration bursts, it can supply up to 9 Arms for five seconds, which helps during starts, reversals, and short peak-load events. Line consumption during rated operation is 1.2 kVA, so cabinet wiring and circuit protection must match that apparent power. Control and diagnostics are exchanged through the integrated Ethernet/IP interface, allowing networked status monitoring and communication over standard industrial Ethernet infrastructure.

This unit is delivered in the Standard USA version, so its configuration matches North American installation practices. The internal operating mode is set to Position Indexer, which allows standalone point-to-point motion sequences without an external motion controller. The extension field is None (rev 7), so no auxiliary I/O or feedback daughtercards are installed. That keeps the base configuration straightforward for applications that do not need added interface hardware. With a transport mass of 1.1 kg, the drive fits compact control panels and adds little load to DIN rail or backplate mounts.