Product Description:

Kollmorgen’s AKD-P00306-NACC-D000 is a digital servo drive in the AKD Servo Drives series. The unit commands synchronous or induction servo motors in machinery that requires precise speed and position regulation, including packaging lines, pick-and-place stations, and test stands. By converting line power to a regulated three-phase output and executing closed-loop control, it serves as the power stage between the motion controller and the motor in industrial automation systems. This arrangement allows the drive to regulate motor behavior directly while the higher-level controller manages the motion sequence.

The drive version is the Position Indexer, which means the device can store motion profiles and perform point-to-point moves without a separate PLC. Communication is available over EtherCAT & CANopen, so it can operate in real-time Ethernet networks or legacy CAN-based systems. Continuous motor current is rated at 3 Arms, which sets the sustained current available for steady torque output. A peak capability of 9 Arms for 5 seconds provides additional current during acceleration and short overload events. The power input is rated at 1.2 kVA for S1 duty, and the drive accepts 120 / 240 Vac 1~/3~ mains power for use with either single-phase or three-phase feeders.

The customization variant is Standard EU German, which sets the front-panel text, parameter defaults, and compliance marking for that regional configuration. The hardware extension is none, revision 7, so no optional safety relay, I/O expansion, or encoder emulation boards are fitted. With a mass of only 1.1 kg, the drive can be mounted on a DIN rail or plate in tight spaces, and the low weight reduces the load on supporting structures. Its compact form also helps when multiple axes must be placed close together inside a shallow control cabinet.