Product Description:

The AKD-N00607-DBEC-E000 is a servo drive produced by Kollmorgen within the AKD Servo Drives series. It regulates three-phase motors in distributed automation lines, supplying controlled current and voltage so a motion controller can position axes precisely. Mounted close to the motor, the unit reduces cabinet wiring and supports IP-rated drive functionality at the machine frame, which helps keep machine layouts compact and simplifies cable routing on moving assemblies.

The drive provides a continuous output of 6 Arms, while short-term acceleration demands can be met with 18 Arms for up to five seconds. These currents are supplied from a three-phase input of 240 / 480 Vac, which the unit converts into regulated motor power for controlled motion. Under rated S1 duty, the converter handles 4.49 KVA, which is useful when evaluating the upstream electrical load. The housing is classified as a Near Servo Drive (IP65/67), so it resists dust ingress and tolerates high-pressure water exposure without requiring an additional enclosure. This arrangement supports installation directly on machine sections where shorter motor leads can improve layout efficiency and reduce the amount of separate cabling.

The device is supplied in the Standard EU English variant, so parameter names and default messages follow that language setting. Communication with the higher-level controller takes place through EtherCAT, allowing synchronized network exchange for coordinated multi-axis motion. Power and feedback connections are routed through the Hybrid Motor Conn. option, which combines energy and signal paths in one sealed interface for compatible motors. The enclosure weighs 2.7 kg, which should be considered when the drive is mounted on articulated or traveling machine sections. Its near-motor layout also helps keep installation areas cleaner by reducing the need for long cable runs between the control cabinet and the driven axis.