Product Description:

The AKD-M02406-11CEC-0000 is a servo drive produced by Kollmorgen and assigned to the AKD Servo Drives series. By converting incoming AC power into controlled, high-bandwidth output for brushless servomotors, the device forms the feedback-regulated link between motion commands and mechanical actuation in industrial automation cells, packaging lines, and assembly stations. Its embedded electronics monitor current and velocity loops to maintain commanded trajectories. This supports repeatable positioning and stable speed control during continuous machine cycles. It is suited for coordinated axes that require fast response to changing load conditions.

Its Drive Version is Motion Control, meaning the drive can execute functions such as electronic gearing and camming internally. The continuous output capacity is set by a 24 Arms nominal current limit, while brief acceleration demands are supported by a 48 Arms peak output current for five seconds. Incoming power must not exceed 7.6 kVA under S1 duty, and the front-end rectifier accepts 120 / 240 Vac 1~/3~ input, so the same unit can be wired to single-phase or three-phase supplies without modification. These values set the operating envelope and input requirements used when matching the drive to a compatible motor during continuous-duty operation.

With a housing mass of 3.7 kg, the drive can be mounted on DIN rail or panel surfaces without additional reinforcement, which helps keep installation straightforward in modular frames. Its compact weight also reduces handling demands when the unit is positioned in densely packed control cabinets, and it leaves space for wiring and ventilation around the chassis. The designation AKD Servo Drive places the unit within a platform that uses shared I/O pinouts, expansion slots, and parameter structures across the family. Configuration and diagnostic access are supported through software utilities provided by Kollmorgen.