AKD-B04807-NCAN-0000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The AKD-B04807-NCAN-0000 is a servo drive from Kollmorgen and part of the AKD Servo Drives series. It features a nominal current of 48 Arms, peak output current of 96 Arms for 5 seconds, and supports analog fieldbus connectivity. This standard USA variant has a rated supply voltage of 240 or 480 Vac three-phase and weighs 11.5 kilograms.
Internal Product Review
The AKD-B04807-NCAN-0000 is a Kollmorgen AKD servo drive with a base drive version and analog fieldbus connectivity. Nominal current at 48 Arms and peak output current of 96 Arms for 5 seconds support strong servo response during dynamic motion profiles. Rated for 240 / 480 Vac 3~ input and 40.9 KVA S1 power, the drive stands out as a capable choice for demanding motion systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-B04807-NCAN-0000 is a digital servo amplifier produced by Kollmorgen and belongs to the AKD Servo Drives series. As a drive controller, it regulates current and velocity loops for brushless servomotors in automated machinery. The unit interfaces between a three-phase mains supply, the control system, and the motor to provide precise torque commands and protect the power stage. By adjusting motor output in real time, it supports smooth speed regulation during continuous motion and accurate response during starts, stops, and direction changes. In industrial automation, it maintains commanded motion profiles with high accuracy and exchanges diagnostic data with the host controller.
The customization variant is Standard USA, which means the unit is configured for North American installation practices. The drive is supplied in the Base version, so it includes the standard control electronics and no optional safety or feedback expansion cards. Command signals enter through an analog interface, where differential ±10 V speed or torque references are accepted and status returns are provided on matching voltage channels. This arrangement suits control systems that rely on conventional reference wiring rather than network-based command transfer. Under continuous S1 duty, the current loop is rated at 48 Arms, while transient accelerations of up to five seconds can reach 96 Arms without exceeding the thermal model.
The unit is part of the AKD Servo Drive product family and draws a continuous apparent power of 40.9 kVA when delivering full nominal output. It accepts a three-phase mains connection of 240 / 480 Vac 3~, allowing the same model to operate from either low- or high-voltage factory buses without extra taps. The standard-width enclosure weighs 11.5 kg, which helps simplify panel mounting and supports the clearances needed for convection airflow. The dual-voltage input range gives the controller added flexibility in cabinets that must match different plant power systems while still driving the same class of motor.
