Product Description:

The AKD-B02407-NCSQ-0000 is an AC servo drive produced by Kollmorgen within the AKD Servo Drives series. The unit functions as a power and control interface between the plant's three-phase mains and a matched servomotor, providing closed-loop regulation of torque, speed, or position. By converting line energy into a pulse-width-modulated output, it enables precise, repeatable axis motion in assembly cells, packaging stations, and other industrial automation equipment. It supports installation in control cabinets where compact footprint and deterministic network communication are required. This type of drive is commonly used on axes that must start, stop, and reverse with consistent response.

Its power stage is designed for a three-phase mains range of 240 / 480 Vac 3~. Within that envelope, the converter can continuously deliver 24 Arms to the motor, which sets the thermal sizing for cables, fuses, and the drive heat sink. For short accelerations or shock loads, it supports a five-second surge of 48 Arms, allowing machines to overcome static friction without requiring a larger drive. The input bridge and bus capacitors are rated for a sustained apparent power of 15.2 kVA, indicating the level of supply capacity needed during duty-cycle peaks. Command data and cyclic setpoints travel over SynqNet, giving deterministic packet timing for coordinated multi-axis motion.

The customization variant is listed as Standard USA, so the labeling, fusing assumptions, and EMC practices match typical North American panels. Kollmorgen ships this unit in the Base drive version, so no optional feedback or safety boards are factory installed. This keeps the configuration focused on the main power and motion-control functions built into the drive. The standard-width housing weighs 5.3 kg, which is useful when planning rail spacing and handling during cabinet installation.