Product Description:

The AKD-B02407-NBAN-0000 is a three-phase servo drive manufactured by Kollmorgen for the AKD Servo Drives series. In an automation line this unit sits between the mains supply and the motor, converting incoming AC power into regulated output that enables precise velocity, position, and torque control for coordinated motion axes.

The drive operates from a symmetrical input of 240 / 480 Vac 3~, giving designers flexibility to use either low- or medium-voltage plant power. Its continuous output capability is 24 Arms, while a short-term surge of 48 Arms for five seconds allows acceleration of high-inertia loads without oversizing the cabinet supply. Under nominal conditions the power section draws about 15.2 KVA, a value that helps determine feeder breaker and cable sizing. Control integration is handled through Analog fieldbus connectivity, so drive commands are delivered as ±10 V velocity, torque, or position references rather than digital packets; this suits legacy PLCs or simple stand-alone loops. The firmware listed as the Base drive version provides standard current, velocity, and position loops without optional safety or advanced machine tool functions, simplifying parameter sets and update procedures.

Additional attributes round out the installation profile. The regional build is the Standard USA customization variant, meaning panel labeling, fuses, and emissions limits align with North-American codes. No auxiliary I/O or memory cards are present because the hardware extension is specified as None (rev 8+), which minimizes spare-part inventory and keeps the footprint consistent across revisions. With a mass of 5.3 kg, the standard-width housing can be mounted on DIN rails or directly to a backplate without requiring reinforcement, and its weight also influences vibration calculations when the drive is used on moving machine carriages.