Product Description:

The AKD-B02407-NAAN-0000 servo drive is produced by Kollmorgen within the AKD Servo Drives series. As an amplifier for synchronous and induction servomotors, it regulates torque, speed, or position in automated machinery and provides closed-loop motion control between the host controller and the motor it powers. The device links line power to motion axes so fabrication cells, packaging lines, and material-handling stations can execute programmed movements with consistent accuracy. Its real-time processing completes current loops in microseconds to maintain precise dynamic response during rapid changes in load and command values.

The drive delivers a continuous motor line current of 24 Arms, giving a clear ceiling for thermal sizing under steady-state duty. For short bursts, the current headroom doubles to 48 Arms for up to five seconds, so accelerations and impact loads can be absorbed without drive shutdown. The power section is rated at 15.2 kVA, indicating the apparent power required from the mains at maximum load. These currents are supplied from a three-phase feeder at 240 / 480 Vac 3~, allowing the same hardware to operate on either lower or higher plant voltage. Control signals enter through an analog interface, making the unit compatible with voltage or current command sources such as PLC motion cards.

The drive has a mass of 5.3 kg, so it can be installed on standard DIN rail or back-panel plates without heavy structural support. The customization listing Standard USA confirms the labeling, fusing references, and agency marks expected in North American panels. The drive has a Base version, which means no optional safety or regenerative hardware is preinstalled. The hardware extension is listed as no hardware extension, revision 7, leaving the expansion slot open for added feedback or I/O functions.