Product Description:

The AKD-B01207-NAAN-0000 is a servo drive manufactured by Kollmorgen within the AKD Servo Drives series. It serves as the power interface between a motion controller and an AC motor, modulating voltage and current for precise speed and torque regulation in automated machinery ranging from packaging lines to robotic cells. This arrangement allows the drive to support controlled motor response during indexing, positioning, and continuous-speed operation. It is suited for machinery that depends on stable axis behavior as loads and command values change throughout a cycle.

The drive accepts a three-phase input of 240/480 VAC three-phase, allowing the same unit to operate on low- or high-voltage factory buses. At continuous load, it delivers a nominal output of 12 Arms, while short bursts up to 30 Arms for five seconds accommodate motor acceleration or shock loads. Its rated input power is 7.65 kVA, which helps with upstream power sizing for conductors and protective devices. Command and feedback signals are exchanged over analog interfaces, so the unit can follow classic ±10 V velocity loops or current references from legacy PLC analog outputs. This signal format supports integration with control systems that do not rely on digital network commands.

The customization variant marked Standard USA indicates that labeling, fusing, and safety features follow North American control panel practices. Because the drive version is Base, no optional safe torque off or expansion slots are installed, keeping the configuration focused on core drive functions. The hardware extension uses revision 7 boards, and no auxiliary I/O or memory modules occupy the reserved connectors. With a mass of 5.3 kg, the unit suits standard AKD cabinet layouts and fits compact control enclosures without requiring an oversized mounting area.