AKD-B01206-NBS9-0000
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen AKD-B01206-NBS9-0000 servo drive is a base Ethernet drive that has plug-and-play compatibility with Kollmorgen motors. The drive comes with a current rating of 12 Arms and a voltage rating of 120 / 240 VAC.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD-B01206-NBS9-0000 base Ethernet servo drive is a reliable and versatile servo drive from the house of Kollmorgen. It is one of the fastest servo drives, characterized by the most precise motion and the best output. The drive features plug-and-play compatibility with Kollmorgen motors. The unit should be installed only in industrial plants that follow the complete regional directives related protocol. Extreme precaution should be exercised when transporting the unit; transporting must be done without subjecting the drive to shocks. The continuous output power of the AKD servo drive is 4000 Watts and its current rating is 12 Arms. The unit has a floating relay contact to indicate its operational readiness. The drive displays fault message codes with either an F prefix or an E prefix depending on the severity. Its rotary switches can be used to set the DHCP IP and static IP when the 24 V supply is off. This drive related operating and position control blocks can be set up by using the WorkBench software on a PC and connecting its service interface to the Ethernet interface of the PC. The testing and setup of the device must be done only by personnel with expertise in the field. The AKD servo drive must be mounted in a closed control cabinet and the site must be free from conductive or corrosive materials. If the motor or amplifier is not EMC-grounded properly, there is a risk of electrical shock. Non-conductive mounting plates must not be used. In the case of unfavorable circumstances, a copper mesh tape should be used between the earthing bolts and earth potential in order to deflect currents.
Frequently Asked Questions about AKD-B01206-NBS9-0000:
Q: What is the depth of the AKD servo drive?
A: The depth of the AKD servo drive is <215 mm with connectors and 187 mm without connectors.
Q: How many users can be connected to an AKD servo drive at a time?
A: Only one user can be connected to an AKD servo drive at a time.
Q: What is the position loop bandwidth of the AKD servo drive?
A: The position loop bandwidth of the AKD servo drive is between 1 Hz and 250 Hz.
Q: What is the DC bus link voltage of the power section of the AKD servo drive?
A: The DC bus link voltage of the power section of the AKD servo drive is 170 VDC to 340 VDC.
