Product Description:

The AKD-B00607-NCAN-0000 is a digital servo drive produced by Kollmorgen within the AKD Servo Drives series. It functions as the power stage between a motion controller and a three-phase servo motor, converting line voltage into accurately regulated current so that industrial axes follow commanded torque, speed, or position profiles. Advanced current-loop processing, sensor feedback scaling, and fault monitoring are built in to support precise automation tasks ranging from packaging lines to robotics. Built-in monitoring also helps the drive respond quickly to abnormal operating conditions that could interrupt controlled motion.

This model is delivered in the Standard USA customization variant, which aligns the drive with North American operating requirements. The drive uses the Base version, so expansion slots for feedback or safety modules remain unused. Command and diagnostic signals are exchanged through an Analog interface, a choice suited to legacy control platforms that rely on ±10 V references. The continuous output capability is 6 Arms, allowing it to drive medium-frame motors during sustained duty cycles, while the short-term overload ceiling reaches 18 Arms for five seconds to accommodate acceleration peaks and brief load changes. Electrical loading at rated operation corresponds to a supply-side demand of 4.49 kVA, which helps with feeder sizing and overall power planning.

The unit accepts three-phase mains at 240 / 480 Vac 3~, enabling deployment on low- or high-voltage plant grids without tap changes. Because the input range covers common plant voltages, the same drive type can be applied in different facilities without requiring a separate voltage-specific model. Total mass is 2.7 kg, which keeps mechanical loading low on backplates and helps when several drives are installed side by side in a compact control cabinet. Its small physical burden is useful where multi-axis layouts must fit into limited panel space while maintaining organized power and signal routing.