Product Description:

The AKD-B00606-NCAN-0000 is a single-axis servo drive manufactured by Kollmorgen and assigned to the AKD Servo Drives series. In an automation cell, this unit supplies regulated power to permanent-magnet servomotors, letting the controller command velocity or torque with high bandwidth. It forms the power interface between low-level motion commands from a PLC and the electromagnetic requirements of the motor, completing a closed-loop system for precise positioning tasks on conveyors, pick-and-place heads, or indexing tables.

The drive is shipped in the Standard USA version, so its default settings, markings, and protective features match North American electrical practices. It uses the Base version, so expansion slots for feedback or safety options are not populated when only core axis control is required. Machine I/O is linked over an Analog interface that accepts ±10 V command signals and provides proportional velocity or current feedback to legacy motion controllers. Power enters through a universal input stage rated at 120 / 240 Vac 1~/3~, allowing the same model to run on single-phase or three-phase supplies without tap changes. Continuous operation at full rated load requires an input capacity of 2.38 kVA, so cabinet wiring and circuit protection must be sized accordingly.

The output stage delivers a nominal motor current of 6 Arms for steady-state motion, while transient moves such as rapid accelerations can draw up to 18 Arms for five seconds before the drive folds back. This current margin helps the axis overcome static friction or short process shocks without requiring a larger motor. Despite that capability, the enclosure weighs only 1.1 kg, which eases installation on densely packed backplates. Its parameter structure and diagnostics are consistent with the AKD Servo Drives line, which helps maintain a familiar operating format across similar controllers.