Product Description:

The AKD-B00307-NCSQ-0000 is a configurable AC servo drive produced by Kollmorgen for the AKD Servo Drives series. Designed for closed-loop motor control, this module regulates position, velocity, and torque in automation equipment such as indexing tables, pick-and-place stations, and packaging axes. By converting three-phase mains power into a precisely modulated output for synchronous or induction motors, the drive keeps machine cycles aligned with motion commands from higher-level controllers. This control approach supports coordinated axis movement where repeatable starts, stops, and speed changes are required during automated production.

The drive uses the Standard USA customization variant, so its default settings follow North American conventions. The unit is the Base version, so no optional I/O or safety extensions are preinstalled. Command and diagnostic data travel through SynqNet, a deterministic Ethernet-based fieldbus that allows multi-axis updates in microseconds. Under continuous S1 duty, the power stage delivers 3 Arms of nominal current to the motor windings, while acceleration bursts are supported with a peak output of 9 Arms for up to five seconds without derating. This combination allows the drive to supply steady running current during normal operation and short-duration overload current during rapid acceleration or load changes.

Matching that current capability, the rated input power requirement is 2.24 KVA, so cabinet power distribution must reserve that apparent power per axis. The rectifier accepts 240 / 480 Vac 3~ supplies, allowing the same part number to operate on either voltage class without hardware changes. Heat sinking and the enclosure are sized for standard-width mechanical packaging, and at 2.7 kg the unit remains light enough for DIN-rail or panel mounting without additional supports. The dual-voltage input helps the drive fit facilities with different plant power systems, while the moderate mass simplifies placement in compact control cabinets.