Product Description:

The AKD-B00307-NBSQ-0000 is a servo drive manufactured by Kollmorgen for the AKD Servo Drives series. It translates low-power command signals from an external motion controller into controlled three-phase output that regulates motor torque and velocity in automated machinery. The unit provides the power conversion stage needed for precise positioning, indexing, and coordinated multi-axis motion in packaging lines, material handling systems, and light machine-tool axes. Precise current regulation helps the connected motor start smoothly, hold commanded speed, and respond consistently when the load changes.

The drive accepts a three-phase mains supply of 240 / 480 Vac 3~, so the same unit can be used on either 230 V or 460 V plant power. Under continuous S1 duty, the converter can draw up to 2.24 kVA from the line while limiting motor current to a nominal 3 Arms, which matches small-frame servomotors that run continuously. For rapid accelerations, it supports a five-second burst of 9 Arms, giving extra torque headroom before current limiting reduces output. Command and diagnostic data are transferred through SynqNet, allowing the drive to operate on deterministic gigabit motion networks alongside I/O nodes and other amplifiers. This combination of line input and current capability suits compact servo axes that need continuous operation with short periods of higher acceleration.

The physical build follows the Standard USA customization, so terminal labeling and agency marks align with North American control cabinet conventions. At 2.7 kg, the housing can be mounted on DIN rail or panel without heavy support brackets. The housing format supports compact cabinet layouts where several drives are installed side by side. The Base control package uses a single set of parameter pages, which keeps setup straightforward when multiple axes share a cabinet. A None (rev 8+) hardware extension means no auxiliary encoder or I/O expansion is installed.