Product Description:

The AKD-B00306-NCAN-0000 is produced by Kollmorgen as a member of the AKD Servo Drives series. The unit functions as a digital power stage that links a motion controller to a brushless servo motor, providing closed-loop regulation of torque, velocity, and position in packaging lines, robotics, and pick-and-place equipment. Internal signal processing coordinates current, velocity, and position loops while the integrated power electronics convert filtered mains energy into the three-phase output required by synchronous machines. It is intended for mounting on ventilated control panels, where natural airflow helps maintain acceptable operating temperature.

It accepts a supply of 120 / 240 Vac 1~/3~, so the same hardware can connect to either single-phase branch circuits or three-phase mains. Under continuous duty, the inverter delivers 3 Arms to the motor windings, a value that balances copper loss with heat-sink capacity, while acceleration intervals lasting up to five seconds permit a surge to 9 Arms. The energy drawn from the network is limited to 1.2 kVA at the S1 operating point, which helps keep input demand within a predictable range. Command exchange with the supervisory controller is carried over Analog control signals, meaning speed or torque references arrive as ±10 V or 4–20 mA inputs that the drive samples and scales through its high-resolution ADC.

The configuration shipped as Standard USA aligns parameter defaults, labeling, and fuse recommendations with North American conventions. Because the electronics follow the Base drive version, expansion slots for feedback, Ethernet, or safety modules remain empty, eliminating unused functions while preserving compatibility with the broader AKD Servo Drive platform. At only 1.1 kg, the housing is light enough for DIN-rail installation on swing-out panels, and the reduced mass supports compact panel layouts.