Product Description:

The AKD-B00306-NAAN-0000 is a digital servo drive manufactured by Kollmorgen for the AKD Servo Drives series. It converts AC mains power into regulated motor current for closed-loop control of torque, speed, and position in automated equipment such as pick-and-place robots, packaging machines, and compact conveyor axes. When paired with a motion controller, the drive maintains commanded motion profiles while helping protect the motor from overcurrent and thermal stress. It is commonly used where a compact drive must respond quickly to changing load conditions while maintaining stable feedback control.

Its customization variant is Standard USA, so labeling, parameter settings, and compliance settings match typical North American control panels. Motion references reach the unit through an analog interface, allowing ±10 V velocity or torque commands when digital fieldbuses are unnecessary. This arrangement suits machine layouts that rely on stand-alone controllers or local reference signals instead of networked communication. The power stage delivers a continuous motor phase current of 3 Arms and can reach 9 Arms for five seconds during rapid acceleration or disturbance recovery. Line consumption under continuous S1 duty is limited to 1.2 kVA, which supports supply and protection planning. The drive uses the base version, so advanced application modules are not installed.

It provides fundamental position, velocity, and torque loops without embedded PLC or safety extensions. There is no hardware expansion, and the unit is revision 7. Without added option boards, the unit keeps a straightforward electrical layout and a compact enclosure profile. Acceptable mains sources include single-phase or three-phase feeds at 120 / 240 Vac, which gives flexibility for different installation conditions. Despite its integrated filter and power electronics, the enclosure weighs 1.1 kg, which helps keep DIN-rail installations compact and reduces mass on moving platforms or gantry carriages.