AKT-DT-2RT-000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
11 Seconds
The Kollmorgen AKT-DT-2RT-000 is a digital output module from the AKT IO Terminals series with two channels and relay outputs that are normally open. It has a current rating of 2.0 Amps, operates at a rated load voltage of 230 V AC or 30 V DC, and offers a mechanical life of 20 million cycles. The module has an IP20 protection class and a bus current consumption of 85 mA.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKT-DT-2RT-000 is a relay-based digital output terminal manufactured by Kollmorgen for the AKT IO Terminals series. As an Advanced Kollmorgen Terminal module, it occupies one slot on the fieldbus rail and provides two independent relay points that can drive pilot devices, indicator lamps, or low-duty contactors in automated machines. By converting controller commands into isolated contact closures, it bridges low-energy logic levels and higher-voltage field circuits commonly found in industrial automation cells. Because the outputs are relay based, the terminal is suited to simple on-off switching tasks where electrical isolation between the control side and the load circuit is required.
This module draws a control-side bus current of 85 mA, so system power budgeting must accommodate that load on the supply line. Each relay can switch a continuous load of up to 2.0 A, and the contacts are rated for a maximum of 230 V AC / 30 V DC, allowing either mains-level AC devices or low-voltage DC solenoids to be driven. The contacts are normally open (N/O), so the field circuit closes only when the controller energizes the coil. In the controller image, the terminal occupies a two-output process width, which keeps programming access straightforward. That layout fits standard output mapping used in machine control programs.
Service life considerations include an electrical endurance of 1 × 105 operations at 5 A and 30 V DC and a mechanical endurance of 2 × 107 cycles with no load applied. For very small consumers, the relays operate reliably down to a minimum load of 10 mA at 5 V DC. The housing meets IP 20, so it is intended for installation inside enclosed control panels. An internal ballast supports lamp-test strings up to 4 × 58 W, which allows the terminal to handle common signaling loads without requiring an external accessory for that function.
Frequently Asked Questions about AKT-DT-2RT-000:
Q: How many output channels does the AKT-DT-2RT-000 terminal provide?
A: The AKT-DT-2RT-000 digital output module contains 2 individual output channels.
Q: What is the rated load voltage for the AKT-DT-2RT-000 output module?
A: The rated load voltage for this terminal is 230 V AC or 30 V DC.
Q: What kind of relay contacts are used in the AKT-DT-2RT-000 module?
A: This terminal uses normally open relay contacts for output switching.
Q: What is the minimum permitted load on each output of the AKT-DT-2RT-000?
A: The minimum permitted load for the device is 10 mA at 5 V DC.
Q: What protection class does the AKT-DT-2RT-000 terminal meet?
A: The AKT-DT-2RT-000 falls under protection class IP 20, which provides basic protection against solid objects.
