AKT-AT-810-000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
13 Seconds
The Kollmorgen AKT-AT-810-000 is an analog output module from the AKT IO Terminals series. It features 8 channels with a signal range of 0 to 10 VDC and a resolution of 12 bits with 4095 increments. The module is designed for mounting on a 35 mm EN 50022 rail and supports single-ended output topology.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKT-AT-810-000 is an analog output module manufactured by Kollmorgen within the AKT IO Terminals series. Installed on a Standard-Bus segment, it translates digital command words from a PLC into regulated DC voltages for field actuators and drives. By presenting an analog output signal and using the 0 V power contact as its reference ground, the unit adds scalable voltage control to distributed I/O stations without altering controller logic or rack dimensions.
Each of its 8 channels sources a programmable signal across the 0 to 10 V range; full-scale is coded as 0x7FFF, letting the controller map setpoints directly to voltage. Conversion accuracy is supported by a 12-bit resolution, while the underlying register image exposes 8 × 16-bit words for straightforward mapping in the task cycle. Outputs use a single-ended topology, so every channel shares the common 0 V power contact. The terminal clips onto the 35 mm EN 50022 rail to keep wiring aligned with other Advanced Kollmorgen Terminal devices. This output range suits proportional valves, analog speed references, or trim circuits that depend on positive voltage feedback.
The process image also offers 8 × 8-bit optional control or status flags for diagnostic tasks, and output words follow the Two's complement format to match typical arithmetic in motion controllers. The output range is divided into 4095 increments, giving 2.44 mV per step over the full span. Module electronics draw a maximum Standard-Bus current of 20 mA, equal to the listed power-contact requirement, so no additional supply is needed. Protection class is rated at IP 20, indicating finger-safe openings but no water ingress resistance, and mounting places the reference ground directly on the 0 V contact to minimize loop noise during high-speed updates.
Frequently Asked Questions about AKT-AT-810-000:
Q: How many output channels are available on the AKT-AT-810-000 module?
A: The AKT-AT-810-000 analog output module features 8 independent channels for signal output.
Q: What is the signal output range of the AKT-AT-810-000 terminal?
A: This module provides a signal range of 0-10 Vdc for each analog output channel.
Q: What output resolution does the AKT-AT-810-000 support?
A: The terminal offers a resolution of 12 bits, supporting 4095 increments for precise output control.
Q: Which output topology does the AKT-AT-810-000 analog module use?
A: The output topology for this model is single-ended, ensuring straightforward integration in standard applications.
Q: What mounting rail is required for installing the AKT-AT-810-000 module?
A: The AKT-AT-810-000 mounts onto a 35 mm EN 50022 rail, making installation compatible with standard DIN rail systems.
