ACO5000DP Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen ACO5000DP is part of the 5000 Indexer Drivers series and operates with a control supply of 24 VDC. It features 8 digital inputs, 4 digital outputs with a 10 mA load, and 2 analog outputs. The device supports a maximum output frequency of 5000 Hz and an efficiency of 96% at nominal load.
Internal Product Review
The ACO5000DP is a Kollmorgen 5000 Indexer Driver with 3-phase output and a 480 V maximum output voltage. A 24 VDC control supply and 96% efficiency at nominal load support efficient drive performance in automated motion systems. Fast response from a 10 ms start lead time makes the ACO5000DP a strong choice for indexing applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The ACO5000DP belongs to Kollmorgen’s 5000 Indexer Drivers series and functions as a programmable drive that sequences three-phase motors in material-handling and positioning systems. By combining onboard motion logic with field-level I/O, the unit replaces separate controllers and delivers time-critical commands directly to connected equipment. In industrial automation, it sends programmed velocity and position profiles so conveyors, rotary tables, or pick-and-place axes move the required distance during every cycle.
The control electronics are powered from a dedicated 24 VDC rail, and user commands reach the drive through 8 optically isolated digital inputs that accept sinking or sourcing signals. Conversion efficiency reaches 96% under nominal load, which limits heat generation in the panel while the unit supplies connected motors. The carrier frequency can be set as high as 5000 Hz, allowing rapid pulse-train updates during high-speed positioning. The power stage can modulate up to 480 V at its output terminals, matching common 400 V class servo and induction motors. Two analog outputs report speed or torque demand, while four digital outputs provide status signals. Each transistorized output channel can support a load of 10 mA.
The unit provides 3 sinusoidal outputs for three-phase drives, and the associated terminal block accepts conductors with cross-sectional areas up to 10 mm². A front-panel 10 kΩ potentiometer enables manual jogging or gain adjustment without software. Protective circuits tolerate line surges up to 500 VAC across the PTC network, helping protect the electronics from short-duration overvoltage conditions. Fault recovery is initiated by a reset pulse lasting at least 5 ms, which gives the control circuit enough time to register the command. A 5 VDC sensor supply powers incremental encoders, and a start lead time of 10 ms supports contactor coordination. The front panel also includes a seven-segment status display that presents numeric error codes for diagnostics.
