C2.SM.000-3200 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB C2.SM.000-3200 is a synchronous servo motor from the SM Synchronous Servo Motors series. It has a rated power of 0.75 kW, operates at a rated speed of 3000 rpm, and provides a rated torque of 2.4 Nm. The motor has a maximum current of 16.0 A, a maximum torque of 12.2 Nm, and weighs 3.9 kilograms.
Internal Product Review
The C2.SM.000-3200 is a KEB synchronous servo motor that delivers 0.75 kW rated power at 3000 rpm for fast, controlled axis performance. Rated torque of 2.4 Nm and max torque of 12.2 Nm give the motor a very appealing mix of steady output and strong overload headroom. Rotor inertia of 2.7 kgcm2 supports crisp acceleration, making this motor a capable choice for precise servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The C2.SM.000-3200 is a synchronous servo motor manufactured by KEB and supplied within the SM Synchronous Servo Motors series. It is intended for closed-loop positioning and speed control on compact machine axes where quick response and repeatable accuracy are required. The motor converts electrical energy from a matched drive into mechanical rotation that can be coupled directly to gearheads, belt stages, or load shafts in industrial automation assemblies. Its compact format makes it suitable for installations where responsive motion and accurate speed regulation are needed without a large motor footprint.
At its rated operating point, this model delivers a continuous mechanical output of 0.75 kW. The shaft turns at 3000 rpm while producing 2.4 Nm of torque from a phase-to-phase supply of 230 V and a rated current draw of 3.0 A. When transient load spikes occur, the motor can reach a maximum torque of 12.2 Nm without exceeding its normal thermal operating range. The winding resistance of 4.2 Ω and the motor inductance influence current response, which helps the connected drive regulate commutation and maintain stable operation during changing load conditions.
The electrical overload ceiling is a phase current of 16.0 A, which supports short periods of rapid acceleration before the control system returns the current to nominal levels. At standstill, the motor can hold a load with 2.7 Nm of stall torque while requiring a stall current of 3.2 A, which helps limit heat rise during static positioning. Dynamic response is affected by the rotor moment of inertia of 2.7 kg·cm², giving a balance between quick speed changes and stable motion. A coil inductance of 11.4 mH helps smooth current transitions, and the 64.3 V/1000 rpm voltage constant relates back EMF to motor speed. The motor has an overall mass of 3.9 kg, which supports installation on light gantries and tooling slides.
