02.P1.100-0217 KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The KEB 02.P1.100-0217 is part of the P1 Encoders and Brakes series and features zero backlash with a nominal torque of 1.4 Nm. This brake operates at 24 VDC and 10 Watts, supports a flange diameter of 45 mm, and a max bore of 8 mm. It has an IP20 rating, a max speed of 10000 rpm, and is rated for a duty cycle of 100%.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 02.P1.100-0217 is a clutch-brake unit from the P1 Encoders and Brakes series manufactured by KEB for positioning tasks in industrial automation. When coupled to a servo or stepper motor, the module engages or disengages torque transmission on demand, enabling rapid index stops and emergency holding without mechanical backlash. By integrating an electromagnetic brake and clutch in one compact body, it simplifies shaft-mounted motion control assemblies found in packaging machines, pick-and-place gantries, and light conveyor sections. Its compact format also helps it fit into machines where separate clutch and brake components would take up additional mounting space. The combined design reduces the number of separate parts required around the motor shaft and nearby mounting hardware.
The unit carries a protection class of IP20, indicating that its coil and friction surfaces are shielded against accidental finger contact and moderate dust. Its armature can track shafts running up to 10000 rpm while sustaining an electrical life of approximately 10000000 cycles. Nominal engagement torque is rated at 1.4 Nm, providing reliable holding for small-to-medium inertial loads when the brake is energized. The electromagnetic circuit operates from a coil supply of 24 VDC; at this voltage the design draws 10 W, allowing direct connection to common control-cabinet power buses and standard industrial power supplies. Zero backlash between driving and driven elements ensures repeatable stop positions during frequent start-stop operation, and a 100% duty cycle supports uninterrupted on-off switching. A mounting flange diameter of 45 mm with an 8 mm maximum bore eases installation on standard IEC motor shafts.
Thermal capability spans from -40°C ambient for cold-start installations. The winding temperature can reach 120°C under continuous cycling without exceeding the stated thermal limit. Even at the upper end of that range, the brake maintains a minimum static torque of 0.8 Nm so loads remain secured during power loss.
Frequently Asked Questions about 02.P1.100-0217:
Q: What level of backlash does the 02.P1.100-0217 exhibit?
A: The 02.P1.100-0217 features zero backlash, ensuring precise motion transfer with no lost movement.
Q: What is the duty cycle rating of the 02.P1.100-0217 brake?
A: This model supports continuous operation with a 100% duty cycle rating.
Q: What is the flange diameter of the 02.P1.100-0217?
A: The 02.P1.100-0217 has a flange diameter of 45 mm.
Q: What is the nominal torque output of the 02.P1.100-0217?
A: The nominal torque for this brake is 1.4 Nm, allowing for effective holding and stopping.
Q: What is the required operating voltage for the 02.P1.100-0217?
A: The 02.P1.100-0217 operates at a standard voltage of 24 VDC.
