07.M4.C2D-3220 KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The KEB 07.M4.C2D-3220 belongs to the M4 Variable Frequency Drives series and has an enclosure rating of IP65 with an integrated filter. This drive supports a maximum motor power of 1.5 kW, a nominal output current of 6.2 Amps, and uses a 230 Volt, three-phase supply. It is built for operation at site altitudes up to 2000 meters and can handle ambient temperatures up to 45 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 07.M4.C2D-3220 variable frequency drive is produced by KEB within the M4 Variable Frequency Drives series. As an AC motor controller, it converts fixed-frequency three-phase input into a regulated output so production machinery can run at controlled speeds and torques. Suitable for cabinet-free mounting, the unit integrates directly into conveyor, pump, and fan systems where precise speed regulation improves process stability and energy efficiency. It also supports smoother motor operation than fixed-speed power connection, which helps equipment respond more accurately to changing load conditions during normal use.
Its housing carries an IP65 rating, so dust ingress is prevented and the drive can be washed down without additional enclosures. The input belongs to the 230 V voltage class and accepts three-phase power, which matches common low-voltage distribution networks found on factory floors. A carrier modulation of 4 kHz balances acoustic noise with switching losses inside the IGBT bridge. Under nominal conditions, the inverter supplies 6.2 A of sinusoidal current and provides 2.6 kVA of apparent power at the output terminals. For short intervals, it can deliver up to 130 % of its rated current, giving machines extra breakaway torque without tripping protection circuits. An integrated EMC filter attenuates conducted emissions, which helps the drive operate cleanly on shared electrical systems without requiring additional line chokes.
The connected motor may draw up to 1.5 kW, which suits small hydraulic pumps, fans, and indexing tables. Ambient air around the drive can reach 45 °C while the heat sink itself may rise further before derating becomes necessary, and internal sensors monitor these conditions and trip the unit if limits are exceeded. Installation is permissible up to 2000 m above sea level, so the drive can be used in elevated industrial locations as long as the required mounting and wiring conditions are met. Protective grounding must be sized correctly, and line-to-earth limits must be observed so the unit remains within its stated electrical protection range during operation.
