10.F0.R11-0000 KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
27 Seconds
The KEB 10.F0.R11-0000 is part of the G6 Combivert IO Inverters series. This rack-mounted inverter has a rated output power of 4.0 kVA, supports a motor power of 2.2 kW, and provides a rated output current of 5.8 Amps. It operates at a rated voltage of 400 V AC, with three line phases and a mains frequency of 50/60 Hz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.F0.R11-0000 belongs to the G6 Combivert IO Inverters series developed by KEB. This rack-mount inverter converts fixed-frequency mains power into a variable output that lets plant controllers adjust induction-motor speed and torque. In automated lines, the unit sits between the three-phase supply and the motor, providing regulated voltage, current and braking control so conveyors, pumps or positioning axes follow programmed motion profiles.
The inverter is designed for a three-phase input at 400 V AC and delivers a continuous output of 5.8 A. That current, multiplied by its apparent power rating of 4.0 kVA, defines the thermal load the heat sink must dissipate while the motor runs at nominal torque. For machinery that needs moderate power, the built-in drive stage supports motors up to 2.2 kW. Pulse-width modulation operates at a ceiling of 16 kHz, which reduces audible noise and allows smoother current waveforms but also increases switching losses; drive designers balance this parameter against panel cooling capacity. The three available line phases let the control section implement vector algorithms for constant-torque regulation during both acceleration and regenerative deceleration.
Mechanical integration focuses on compact volume: height is 340 mm, width is 90 mm, and depth is 232 mm, so multiple inverters can be stacked inside a standard 19-inch rack. With a mass of 4.0 kg, technicians can install or replace the unit without lifting aids. An internal brake chopper diverts regenerated energy to a resistor, eliminating the need for an external braking module and simplifying wiring. The mains side is protected by a 10 A fuse, and terminals accept 1.5 mm² conductors for both control and power leads. Operation is synchronized with 50 Hz or 60 Hz grids, ensuring compatibility in mixed-frequency facilities.
