Product Description:

The 13.F6.K1D-YU4M is an inverter drive produced by KEB for the F6 Combivert Inverter Drives series. It converts fixed-frequency mains power into a variable-frequency output that regulates induction motor speed for pumps, conveyors, or fans in automated plants. The unit uses the same platform as other F6 drives, allowing cabinet builders to scale power levels while retaining consistent control interfaces throughout an installation.

The control section provides 3 analog inputs for speed references or process signals, along with 8 digital inputs that accept 24 V logic from limit switches or PLCs. Output signals are handled through 4 digital outputs for drive status and one relay output that can switch auxiliary contactors. The brake circuit supports a current of 2 A for dynamic stopping. The drive also provides two STO inputs for safety-oriented shutdown, three software-configurable outputs that transmit calculated states to higher-level controllers, and four virtual inputs that trigger internal functions without additional wiring. These input and output resources allow physical signals and software events to be assigned without external relays. The available connections also reduce the amount of auxiliary control hardware required in the panel.

Communication through the integrated serial port is preset to 38400 bit/s and uses 7 data bits with even parity. The serial format also includes one start bit and one stop bit, allowing diagnostic tools to connect without changes to the default communication settings. The drive follows the CANopen motion-control guidelines in the CiA 402 profile, which supports standardized device states and command handling. It has a default node address of 1 and can participate in a segmented CAN network when a compatible bus coupler is present. Deterministic message timing supports coordinated communication between the drive and higher-level controllers in distributed automation systems.