10.F6.K1D-YU4M KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.F6.K1D-YU4M is part of the F6 Combivert Inverter Drives series and delivers a rated power of 3 HP. This inverter drive provides protection type IP20, with an integrated brake transistor, and supports a maximum output frequency of 1600 Hz. It features 3 analog inputs, 8 digital inputs, 4 digital outputs, and supports an external supply of 24 V DC.
Internal Product Review
The 10.F6.K1D-YU4M is a KEB F6 Combivert inverter drive with 3 HP rated power and IP20 protection. EtherCAT fieldbus support and a 125 μs current loop time give the drive fast, clean response in demanding motion applications. An integrated brake transistor further improves control, while the 1600 Hz maximum output frequency is a strong highlight for high-speed operation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.F6.K1D-YU4M inverter is manufactured by KEB for the F6 Combivert Inverter Drives series. As a general-purpose AC inverter, it modulates line power and supplies controlled voltage and frequency to motors, enabling closed-loop speed and torque control in conveyors, packaging stations, and similar automated equipment. It forms the central power module between the plant mains and the motor, performing regulation tasks that previously required mechanical gear changes.
With a rated output of 3 HP, the drive is suitable for light industrial axes. Its power stage can deliver carrier frequencies up to 16 kHz, while the generated motor frequency is adjustable from zero to 1600 Hz; these ranges permit precise control of high-speed spindles or slow-moving actuators. The current regulator closes every 125 μs, and the speed regulator updates every 250 μs, providing a tight dynamic response under changing loads. Eight digital inputs, four digital outputs, three analog inputs, and two encoder channels provide real-time signals for position feedback and process commands. An integrated brake transistor absorbs regenerated energy during rapid deceleration, and a pluggable CAN interface provides an additional network channel beside the primary fieldbus. Two STO channels provide functional safety for torque shutdown.
Control and auxiliary electronics are powered by an external 24 V DC supply, allowing the drive to retain communication when the main bus is off. The housing has an IP20 protection rating, making it suitable for installation inside a switch cabinet with controlled airflow. For deterministic machine coordination, the inverter uses EtherCAT as its standard fieldbus. The parameter set is accessible through the dedicated RS232/485 service port. Network diagnostics provide operating status for connected functions without requiring access to the power wiring, simplifying troubleshooting and routine system monitoring.
