00.F6.P00-2000 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 00.F6.P00-2000 is part of the F6 Combivert Inverter Drives series and features PRO control type, with a rated switching frequency of 2 kHz. It operates with a 3-phase 230 V AC/DC mains connection, has IP20 degree of protection, and is suitable for use at temperatures from 5 to 40°C in ambient conditions. The inverter supports operation at site altitudes up to 2000 meters above sea level and allows a software current limit of 125 percent.
Internal Product Review
The 00.F6.P00-2000 is a KEB COMBIVERT F6 inverter drive with PRO control and a 3-phase 230 V AC/DC mains connection. IP20 protection and a rated switching frequency of 2 kHz support clean cabinet integration and consistent drive response in standard industrial service. The 125% software current limit and 150% turn-off current add useful operating margin, making the unit a dependable choice for controlled inverter applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 00.F6.P00-2000 is an AC inverter drive produced by KEB and supplied within the F6 Combivert Inverter Drives series. It modulates the frequency and voltage delivered to three-phase motors so industrial controllers can adjust speed and torque without mechanical throttling, supporting precise process regulation in automated equipment. The PRO control type supports vector, sensorless, and positioning modes for a range of motor-control applications.
The power input accepts three-phase 230 V AC or 230 V DC, and the power stage switches at 2 kHz, balancing acoustic noise with semiconductor heating while maintaining smooth motor current. A software current ceiling of 125% of rated current prevents sustained overloads by coordinating with the internal thermal model. For instantaneous faults, the hardware protection channel disconnects the output at 150% of rated current, limiting energy in the connected machine. The enclosure meets IP20 protection, so it must be mounted inside a cabinet where dust is limited and no water spray occurs. A braking transistor is not included, so regenerated energy must be handled by an external chopper. Safety-related stop functions are unavailable because no safety module is installed.
Operation is permitted between 5 and 40 °C, with an extended range up to 45 °C when derating is accepted. Continuous duty is permitted at an ambient relative humidity of 5% to 85% without condensation. The drive tolerates installations up to 2000 m above sea level without performance loss. Storage is permitted from -25 to 55 °C, while transportation is permitted from -25 to 70 °C. Protective varnish on the circuit boards guards against moisture under these conditions. Correct panel placement helps the drive remain within its rated switching frequency and minimizes exposure to vibration.
