17.F4.T60-1019 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 17.F4.T60-1019 is part of the F4 Combivert Frequency Inverters series and has a nominal voltage of 3 x 500 V AC. It features a rated current of 3 x 42.0 A at 45 °C and provides a rated frequency of 50/60 Hz. This inverter includes an NHF filter type, supports an inductance of 3 x 3.36 mH, and weighs 23.36 kg.
Internal Product Review
The 17.F4.T60-1019 is a KEB F4 Combivert frequency inverter built with an NHF filter and AC input design. Operation at 3 x 500 V and 3 x 42.0 A supports stable performance in demanding drive systems. A -25 °C to 85 °C thermal range makes this unit a dependable choice for varied industrial environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 17.F4.T60-1019 is an AC motor control unit produced by KEB within the F4 Combivert Frequency Inverters series. It interfaces between the line supply and a three-phase machine, converting fixed supply power into a variable output that matches the required speed and torque profile. By adjusting voltage and frequency in synchronized fashion, the device supports precise regulation of pumps, fans, and general-purpose drives in industrial automation, helping connected motors follow process demands during start-up, steady running, and speed changes without abrupt shifts in motor behavior.
An integral line filter identified as NHF attenuates high-frequency switching noise on the input side so the inverter can meet conducted-emission limits on the line supply. The DC link is connected through three inductors rated at 3 x 3.36 mH, and this inductance smooths current pulses and limits di/dt into the motor cable. The power stage is designed for a nominal bus of 3 x 500 V AC, so the inverter is wired to standard 500-volt three-phase networks. Under continuous operation, it delivers up to 3 x 42.0 A, which is the maximum motor current available without thermal derating. The unit accepts a 50/60 Hz line supply, while the internal control section generates the variable output frequency needed by the load. The voltage type is AC, making the product compatible with common industrial distribution systems used in manufacturing facilities.
The passive components are rated for temperatures up to 85 °C and remain functional down to -25 °C, so the inverter can be mounted in control rooms that experience seasonal temperature swings without dedicated climate control. Continuous current ratings are referenced to an enclosure temperature of 45 °C, and higher cabinet temperatures may require output derating or external cooling. With a shipping mass of 23.360 kg, the unit requires a stable back-panel mount during installation, and the enclosure should be supported well enough to avoid strain on electrical connections.
