15.F4.T60-1019 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 15.F4.T60-1019 is part of the F4 Combivert Frequency Inverters series and has a rated voltage of 3 x 500 VAC with a rated frequency of 50/60 Hz. It operates with 3 input phases and a rated current of 3 x 24.0 A at 45 °C. The inverter supports an ambient temperature range from -25 to +85 °C and has an inductance of 3 x 2.1 mH.
Internal Product Review
The 15.F4.T60-1019 is a KEB F4 Combivert frequency inverter designed for 3-phase 500 VAC systems. Rated output of 3 x 24.0 A at 45 °C and 50/60 Hz compatibility make the unit a strong fit for demanding drive applications. Inductance of 3 x 2.1 mH supports stable electrical performance across a wide -25 to +85 °C ambient range.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 15.F4.T60-1019 is a frequency inverter manufactured by KEB within the F4 Combivert Frequency Inverters series. Designed for cabinet mounting, this unit modulates the voltage and frequency delivered to an AC motor so that speed and torque can be matched to process requirements in automated machinery, conveyors, and electro-mechanical test rigs. By converting fixed mains power into a controlled output waveform, the inverter supports closed-loop speed control and soft starting while also reducing mechanical stress on couplings, belts, and other driven components. That operating method helps motors respond more smoothly during acceleration, deceleration, and repeated start-stop cycles under changing process demand.
The drive is wired for a supply of 3 x 500 VAC, matching common 480 to 500 V plant distribution networks used for industrial motor systems. Under a 45 °C ambient temperature, the inverter delivers a continuous output of 3 x 24.0 A @ 45 °C, allowing medium-frame induction motors to reach their rated load without thermal derating during continuous service. Power is accepted through 3 input phases, which helps balance load currents and reduce input ripple compared with single-phase solutions. The unit is compatible with 50/60 Hz mains systems, enabling use in regions that follow either utility standard without hardware changes. This arrangement suits installations where stable three-phase input power is already available at the machine cabinet.
An internal DC-link choke presents an inductance of 3 x 2.1 mH. This smooths current ripples, eases stress on switching components, and helps stabilize the power section during rapid motor load changes. The unit can operate at temperatures down to -25 °C, which supports startup in cold industrial spaces where cabinets may not be continuously heated. It can be stored at temperatures up to +85 °C, allowing the drive to remain in unconditioned storage areas before installation. The choke also helps limit electrical disturbances that can increase heating in the connected motor and cabling.
