14.F4.T60-1008 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 14.F4.T60-1008 is a frequency inverter in the F4 Combivert Frequency Inverters series. It operates on a nominal voltage of 460 V AC, rated current of 20 Amps, and supports a 3-phase AC supply at 50 or 60 Hz. The unit supports a maximum line voltage of 3 x 500 V AC, requires a shielded motor cable up to 30 meters, and works at an ambient temperature of 45 degrees Celsius.
Internal Product Review
The 14.F4.T60-1008 is a KEB F4 Combivert frequency inverter built for 460 V AC service with 3-phase AC input. Rated at 20 A and supporting line voltage up to 3 x 500 V AC (+10%), the drive presents strong electrical capacity for industrial motor control. Shielded motor cable compatibility and EN 55011/B conducted emission performance make the inverter a clean, dependable choice.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 14.F4.T60-1008 is a frequency inverter manufactured by KEB within the F4 Combivert Frequency Inverters series. It converts constant-frequency plant power into a variable output so that induction or synchronous motors can be accelerated, decelerated, and held at precise operating speeds in conveyor lines, pumps, and process machinery. By modulating both voltage and frequency, it supplies the torque profile needed for modern motion control while interfacing directly with standard three-phase distribution panels. This operating method also helps reduce abrupt mechanical loading during starts and stops, which is useful in equipment that must maintain steady and repeatable motor speed.
Electrically, the inverter is optimized for a 3-phase AC supply and accepts an input frequency of 50/60 Hz. Its normal operating point is based on a nominal bus voltage of 460 V AC, delivering up to 20 A of output current to the motor terminals. When the supply network peaks, the circuitry tolerates line potentials as high as 3 x 500 V AC (+10%) without derating. These limits support stable motor control across changing load conditions, and the control section continuously adjusts the output so the connected motor can follow commanded speed changes with consistent torque response. The inverter is intended for use where a fixed incoming supply must be converted into an adjustable motor output for routine industrial duty.
Installation parameters focus on electromagnetic compatibility and thermal limits. To satisfy industrial noise regulations, the unit’s conducted emission profile meets EN 55011/B, so additional external filters are generally unnecessary. Motor leads must be routed with a shielded motor cable, and the permitted maximum cable length is 30 m to help control reflected voltage effects at the motor connection. Continuous operation is allowed in ambient air up to 45 °C, which supports cabinet installation where normal airflow is available. Keeping the output wiring shielded and within the approved distance also helps maintain signal quality and reduces unwanted electrical interference around nearby control equipment.
