12.F4.T60-1009 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 12.F4.T60-1009 is part of the F4 Combivert Frequency Inverters series and has a maximum rated motor power of 4 kW. This one-phase inverter offers an output nominal current of 9.5 Amps at 400V and an output nominal power of 6.6 kVA. It is rated IP20 for protection and operates within a temperature range of -10 to 45 degrees Celsius.
Internal Product Review
The 12.F4.T60-1009 is a KEB COMBIVERT F4 frequency inverter configured for 1-phase mains connection. Rated for 4 kW motor power with 9.5 A output nominal current, the inverter delivers confident drive performance for demanding control applications. IP20 protection and a -10 to 45°C operating range make the 12.F4.T60-1009 a dependable choice for indoor industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 12.F4.T60-1009 frequency inverter is manufactured by KEB and belongs to the F4 Combivert Frequency Inverters series. Designed for cabinet installation, the unit receives fixed mains power and produces variable-voltage, variable-frequency output for precise control of motor speed and torque. In automated conveyors, packaging lines, or fan arrays, the inverter replaces mechanical throttling and supports electronic acceleration ramps, braking profiles, and process-dependent speed changes. It can control asynchronous or permanent-magnet motors while maintaining consistent torque accuracy as operating demands change. The cabinet-mounted design keeps the power electronics protected while allowing access to the control connections and adjustment interface.
Electrical performance centers on a single-phase mains connection, so two supply conductors and a protective earth connection are required, simplifying wiring in small control panels. The drive can feed motors with an output of up to 4 kW. Its output stage supplies a continuous current of 9.5 A when operated on the 400 V class bus. The apparent power capability reaches 6.6 kVA, providing capacity for transient loading and dynamic motor operation. An enclosure rating of IP20 protects against contact with hazardous internal parts and the entry of qualifying solid objects. Because the enclosure does not provide protection against water, the inverter must be installed inside a suitable ventilated electrical cabinet. Adequate cabinet airflow also helps remove heat generated by the power stage during sustained operation.
The inverter supports operation at ambient temperatures from -10 to 45 °C, allowing use in machinery halls that do not have complete climate control. It also tolerates up to 95% relative humidity when condensation is prevented. These operating limits permit use across a broad range of typical indoor industrial conditions, although installation near direct water exposure or condensing moisture should be avoided. The drive uses control algorithms and a parameter structure shared with other compatible power electronics in its product range. This arrangement provides familiar access to motor-control settings, acceleration behavior, and braking functions. Fieldbus adapters can be added when communication with a higher-level controller is required. External braking resistors can manage regenerated energy during rapid deceleration, while optional EMC filters can reduce conducted electrical interference without changing the inverter’s core operating ratings.
