10.F4.FBD-4R01 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.F4.FBD-4R01 is a Combivert F4 frequency inverter from the F4 Combivert Frequency Inverters series. It features field-oriented control mode, a maximum rated motor power of 2.2 kW, and an IP20 protection rating. This compact D-size unit supports InterBus fieldbus and operates at temperatures from -10 to 45°C with up to 95% relative humidity.
Internal Product Review
The 10.F4.FBD-4R01 is a KEB COMBIVERT F4 frequency inverter with field orientated control and InterBus connectivity. Compact D-size housing and IP20 protection support clean cabinet integration in controlled industrial panels. A 2.2 kW motor rating and 4 kVA nominal output make this drive a strong choice for precise mid-range applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.F4.FBD-4R01 is a drive from the F4 Combivert Frequency Inverters series produced by KEB. Classified as a COMBIVERT F4 frequency inverter, the unit regulates the speed and torque of three-phase induction motors in automated machinery and process equipment. By converting a fixed mains input into a variable-frequency output, the inverter allows PLCs and motion controllers to match motor performance to real-time load demands. This capability can conserve energy and improve cycle accuracy in conveyors, pumps, and similar systems where operating requirements change during production.
The inverter uses field-oriented control, allowing vector-based regulation of flux and torque for precise operation at low speeds. It supports motors rated up to 2.2 kW, while its power section can continuously supply 4 kVA of apparent power to the output terminals. The IP20 enclosure protects against accidental finger contact with live parts, but the unit must be installed inside a suitable control cabinet. For networked applications, the optional InterBus fieldbus card enables cyclic setpoint exchange and status monitoring without dedicated hardwiring. This communication option simplifies integration with distributed I/O architectures and allows operating data to be exchanged with the higher-level controller.
The specified operating temperature range is -10 to 45 °C, which covers most indoor industrial facilities. The electronics tolerate up to 95% relative humidity when condensation is prevented, so cabinet ventilation must keep moisture from collecting on internal components. The electronics are housed in a compact D-size chassis that conserves panel space and aligns with the mechanical footprint of other F4 modules. Thermal management relies on natural convection through the finned heat sink, so adequate clearance must be maintained around the inverter to support unobstructed airflow. The cabinet layout should also prevent nearby equipment or wiring ducts from blocking the cooling path.
