07.F4.F1D-BC01 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 07.F4.F1D-BC01 is part of the F4 Combivert Frequency Inverters series and features integrated field oriented control and an integrated braking transistor. This inverter has a protection rating of IP20 and includes an integrated cooling fan. It measures 250 mm in height, 90 mm in width, 160 mm in depth, and weighs 2 kg.
Internal Product Review
The 07.F4.F1D-BC01 is a KEB F4 Combivert frequency inverter with field orientated control and an integrated braking transistor. Integrated fan cooling and IP20 protection support dependable cabinet operation in standard industrial environments. A strong choice for precise drive applications, especially with EN 61800-3 compliance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 07.F4.F1D-BC01 frequency inverter is manufactured by KEB and belongs to the F4 Combivert Frequency Inverters series. As a variable-speed drive, it regulates three-phase motor torque and speed via closed-loop vector control, allowing precise process automation for conveyors, pumps, and general production machinery. The unit is intended for integration inside control cabinets where limited space and straightforward panel mounting are important, and it interfaces with PLCs through standard control terminals to actuate induction or synchronous motors. This arrangement allows the inverter to match motor output to changing load conditions while maintaining stable response during routine machine cycles.
Its control platform applies field-oriented control to compute instantaneous stator currents, giving smooth torque even at low speeds. An integrated braking transistor channels regenerative energy to a resistor, preventing DC-link overvoltage during rapid deceleration. Thermal management is aided by an integrated cooling fan that keeps the heat sink below 85 °C. Compliance with EN 61800-3 supports operation in industrial environments without additional filters. Climatic endurance includes continuous service at up to 95 % relative humidity and installation locations as high as 2000 m above sea level. The housing meets the IP20 protection class, and at 2 kg, it keeps enclosure loading minimal.
Cabinet layout is simplified by the inverter’s physical footprint. The enclosure width is 90 mm, the depth is 160 mm, and the overall height is 250 mm. Two 5 mm mounting holes permit direct screw fastening to backplanes. To maintain unrestricted airflow from the internal fan, installation must leave a bottom gap of 100 mm, side clearance of 30 mm, and a free space of 150 mm above the top edge. The layout also leaves room for wiring access and helps keep heat from building up around adjacent cabinet components. These clearances support airflow and help prevent neighboring devices from recirculating heated exhaust air.
