07.F4.C1D-BN00 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 07.F4.C1D-BN00 is part of the F4 Combivert Frequency Inverters series and has a compact control type with a protection rating of IP20. It weighs 2 kilograms and measures 250 mm in height, 90 mm in width, and 160 mm in depth. This inverter includes a braking transistor accessory and supports a maximum heat sink temperature of 85°C with a maximum relative humidity of 95%.
Internal Product Review
The 07.F4.C1D-BN00 is a KEB F4 Combivert frequency inverter with compact control architecture and an integrated braking transistor, giving the unit a well-balanced drive package. Vertical mounting and IP20 protection make panel installation straightforward, a strong fit for controlled industrial environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
KEB manufactures the 07.F4.C1D-BN00, a frequency inverter that belongs to the F4 Combivert Frequency Inverters series. The unit modulates the output voltage and frequency supplied to an AC motor, allowing closed-loop speed regulation inside automated machinery and conveying systems. As a compact control solution, it integrates with switchgear enclosures where panel space is limited and where dynamic braking is supported through a braking transistor module.
The housing stands 250 mm high, 90 mm wide, and 160 mm deep, so it fits into narrow vertical panels without obstructing adjacent devices. With a mass of only 2 kg, the inverter can be secured to sheet-metal backplates without additional support brackets. Its enclosure is rated at IP20, which provides basic finger protection when the drive is mounted inside a closed cabinet. Electrical terminations are tightened to a maximum of 0.5 Nm, a value that helps prevent thread damage while maintaining low-resistance connections on the spring clamp terminals. The drive is installed in a vertical orientation through 5 mm mounting holes to maintain natural convection across the finned heat sink, and the braking transistor module dissipates regenerated energy when the motor decelerates abruptly.
Environmental parameters show where the inverter may operate. It can be used at sites up to 2000 m above sea level without derating, aligning with the 3K3 climatic category for control cabinets that are ventilated but not exposed to condensation. Heat sink temperature must stay below 85 °C so the internal IGBT modules retain their thermal cycling life. Relative humidity is permitted up to 95 % for short periods, provided that moisture does not condense on energized parts. Vertical mounting also helps maintain steady airflow through the heat sink in enclosed control cabinets.
