07.F4.C3D-5001/1.4 KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
40 Seconds
The 07.F4.C3D-5001/1.4 is a compact frequency inverter by KEB and is part of the F4 Combivert Frequency Inverters series. This unit features an integrated brake transistor and filter, and has a housing measuring 240 mm in height, 90 mm in width, and 250 mm in depth. It is designed with a D-type housing and requires 100 mm of bottom clearance and 150 mm of top clearance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 07.F4.C3D-5001/1.4 is a variable-frequency drive produced by KEB within the F4 Combivert Frequency Inverters series. It converts fixed mains voltage into a controllable output waveform so that induction or synchronous motors can accelerate, decelerate, or hold a precise speed as process demands change. The control electronics and power stage are combined in one assembly, which simplifies wiring and helps save panel space in industrial automation cabinets. This arrangement also reduces the need for separate modules and keeps the overall installation compact. That makes the unit suitable for applications where motor speed must track changing load or process conditions instead of operating at one fixed speed.
The drive has a housing width of 90 mm, a housing height of 240 mm, and a housing depth of 250 mm. These dimensions correspond to the D-class enclosure used for this model and make the unit suitable for narrow columns in multi-axis cabinets. Four mounting points with a bore diameter of 5 mm allow the inverter to be fastened directly to a backplate without extra brackets. The power section includes an integrated brake transistor, so an external chopper is not required when rapid motor deceleration is needed. Parameters, diagnostics, and fieldbus options are accessed from the front panel, which keeps routine access straightforward without auxiliary boards. The enclosure size also helps maintain orderly cable routing in tightly packed sections of the cabinet.
Proper spacing around the enclosure supports cooling and electromagnetic performance. The required bottom clearance is 100 mm, the side clearance is 30 mm, and the top clearance is 150 mm so air can move freely past the heat sink. An integrated filter in the input stage attenuates conducted emissions and can reduce the need for additional line filters in standard installations. When these clearances are maintained, airflow remains unobstructed and adjacent components are less exposed to excess heat and electrical noise. The compact front layout also remains accessible in retrofit panels where available cabinet space is limited.
Frequently Asked Questions about 07.F4.C3D-5001/1.4:
Q: Is a brake transistor included in the 07.F4.C3D-5001/1.4 frequency inverter?
A: This inverter features an integrated brake transistor for dynamic braking control.
Q: Does the 07.F4.C3D-5001/1.4 have an integrated filter?
A: The 07.F4.C3D-5001/1.4 model comes with a built-in integrated filter.
Q: What housing type is used for the 07.F4.C3D-5001/1.4 inverter?
A: The housing type for this device is classified as Type D.
Q: What control type is specified for the 07.F4.C3D-5001/1.4 frequency inverter?
A: The control type for this inverter is designated as compact, optimizing space requirements.
Q: How much top clearance is required for installing the 07.F4.C3D-5001/1.4?
A: This model requires a top clearance of 150 mm for proper installation.
