22.E6.T60-5150 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 22.E6.T60-5150 is part of the Combiline EMC Filters series and has a rated input voltage of 400 V with a rated input current of 126 Amps. This filter accommodates three mains phases and features an IP00 rating. It weighs 36.5 kg and measures 630 mm in height, 269 mm in width, and 180 mm in depth.
Internal Product Review
The KEB 22.E6.T60-5150 is a Combiline EMC filter with a 400 V rated input voltage and 126 A rated input current. A 150% overload capacity for 60 seconds and overvoltage category III support make the unit well suited for demanding drive installations. A strong choice for high-current EMC mitigation in industrial power systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 22.E6.T60-5150 electromagnetic compatibility filter is built by KEB for the Combiline EMC Filters series. Installed between a three-phase power supply and an inverter, it suppresses conducted emissions so adjacent drives, sensors, and communication links can operate without disturbance. The device also limits fast transient energy that could otherwise reach the DC bus of motor controllers, helping automated machinery comply with industrial electromagnetic standards and maintain repeatable process feedback.
The filter is designed for a rated line voltage of 400 V and can carry 126 A continuously on each phase. During short-term power supply excursions, it can withstand a peak voltage of 550 V, while an overload capacity of 150 % for 60 seconds accommodates motor starts or regeneration events. Internal power losses are limited to 230 W, allowing cabinet cooling airflow to be sized accordingly. An IEC gG fuse rated at 160 A provides upstream protection, and the assembly is intended for overvoltage category III environments on three-phase networks. The open-frame construction has an ingress protection rating of IP00, allowing direct busbar connections but requiring installation inside an enclosure that provides the necessary system protection. Solid contamination class 3S2 and a 9 mm mounting-hole pattern support installation in industrial switchgear.
The housing measures 630 mm high, 269 mm wide, and 180 mm deep, giving it a slim profile that aligns with standard drive stacks while leaving space for bending copper conductors. Its total mass is 36.5 kg, so structural shelves or mounting frames must be rated to support the load. Oversized lugs simplify the termination of three power supply phases and the protective earth conductor. The filter’s bus configuration matches the typical 50 mm center spacing used on power distribution bars.
