22.E6.T60-4100 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 22.E6.T60-4100 EMC filter is from the Combiline EMC Filters series and supports a nominal current of 150 Amps with a maximum voltage of 550 Volts. It accommodates a conductor size of 50 mm², operates on 3 phases at 50/60 Hz, and has a weight of 9.7 kilograms. The filter features a four-wire input wiring system and a suppression degree of C2.
Internal Product Review
The 22.E6.T60-4100 is a KEB Combiline EMC filter with 3-phase, four-wire input support. A 400/480 VAC rating and 150 A nominal current give the assembly strong compatibility for demanding industrial drive systems. C2 suppression and support for motor cable lengths up to 300 m make the filter a very capable choice for cleaner long-cable installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 22.E6.T60-4100 electromagnetic compatibility filter is manufactured by KEB within the Combiline EMC Filters series. Designed for three-phase drive systems, this passive component is wired in series with the motor power leads to suppress radio-frequency noise that could otherwise return to the utility line or reach sensitive fieldbus devices. By providing this attenuation, the unit helps machine builders meet conducted emission limits without modifying the associated inverter or motor.
Electrically, the filter is rated for a continuous load of 150 A, allowing it to serve medium-power inverters without saturation. It accepts line potentials up to 400/480 VAC at a utility frequency of 50/60 Hz, and its insulation withstands transient excursions to 550 V. Leakage to protective earth remains below 3 mA, so touch current stays within common safety thresholds. The design accommodates three input phases with four-wire connections, matching typical TN-S or TT supply schemes. A suppression degree classified as C2 indicates suitability for motor cables up to 150 m when unshielded, and with shielded conductors this model supports runs as long as 300 m. These electrical limits are supported by large copper terminals and an internal choke arrangement selected for low differential-mode impedance across the operating spectrum.
Installation dimensions simplify cabinet layout. The aluminum base measures 120 mm in length and 466 mm in width, while the clamp assembly rises 240 mm above the mounting plane. Four clearance holes with a 6.5 mm diameter allow rigid fastening to a backplate. Cable lugs sized for a cross-section of 50 mm² fit the terminal studs, and the assembly weighs 9.7 kg, so it can be positioned without lifting equipment. Internal core resistive loss is specified at 100 W, and that heat is dissipated by natural convection, provided adequate spacing is left around the filter.
