16.E6.T60-4100 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 16.E6.T60-4100 is an EMC filter from the Combiline EMC Filters series with a rated current of 43 Amps and supports a maximum voltage of 550 Volts. It features a 4-wire, 3-phase plus neutral input configuration and is designed for conductor sizes up to 10 mm². The filter measures 330 mm tall, 70 mm wide, and 160 mm deep, and weighs 3.2 kilograms.
Internal Product Review
The 16.E6.T60-4100 is a KEB Combiline EMC filter with a 4-wire, 3-phase + N input configuration and C2 performance for cable lengths up to 300 m. Rated for 400/480 VAC and 43 A, the filter supports dependable mains filtering in demanding drive installations. A well-executed choice for panels requiring stable EMC performance and straightforward integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 16.E6.T60-4100 is an electromagnetic compatibility line filter produced by KEB as part of the Combiline EMC Filters series. Installed between the mains supply and an inverter or other power electronics, the unit attenuates conducted interference so that machinery complies with harmonic and emission limits in automated plants. Its four-wire, three-phase plus neutral topology suits common European and North American distribution systems, allowing the filter to protect both equipment and neighboring devices from high-frequency noise. This arrangement is useful in systems where switching equipment can return unwanted noise to the supply line.
The filter handles a continuous load on the bus up to 400/480 VAC, while its insulation system tolerates surges reaching 550 V without dielectric breakdown. A nominal line current of 43 A is the maximum RMS current that can flow through its inductive and capacitive stages under rated conditions; above that point, insertion loss and heating increase sharply. Internal dissipation is limited to 22 W, so enclosure ventilation can be sized accordingly. Differential and common-mode capacitors restrict earth leakage to below 3 mA, helping prevent nuisance tripping of residual-current devices even when long motor leads or multiple drives share the same protective conductor.
To complete installation, the filter accepts conductors up to 10 mm², matching the current rating without excessive copper loss. It preserves attenuation across a supply spectrum of 50/60 Hz ±10%, simplifying global deployment where grid frequency varies. The assembly meets C2 performance for cable runs as long as 300 m, which supports installations where the drive and motor are widely separated. Compact dimensions with a 70 mm width, 160 mm depth, and 330 mm height reduce enclosure footprint and leave clearance for neighboring components on standard DIN rails or base plates. Total mass is held to 3.2 kg, which eases panel mounting at the 288 mm and 106 mm pitch holes and keeps stress low on lightweight sheet metal doors.
