16.E5.T60.1001 KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
49 Seconds
The KEB 16.E5.T60.1001 is part of the Combiline EMC Filters series and is designed to handle a rated current of 43 Amps with a maximum input voltage of 3 x 480 V AC. The filter measures 352 mm in height, 132 mm in width, and 50 mm in depth, and weighs 2.5 kilograms. It supports a maximum motor cable length of 30 meters, has a DC resistance of 0.010 ohms per phase, and a power dissipation of 30 watts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 16.E5.T60.1001 is an electromagnetic compatibility filter produced by KEB within the Combiline EMC Filters series. The component is placed on the input side of variable-frequency drives and other power converters to limit high-frequency noise, helping maintain compliance with emission limits and protect sensitive devices in automated machinery. By attenuating differential and common-mode interference, it supports stable network operation and reduces conducted emissions returning to the mains.
Electrically, the filter carries a continuous line current of 43 A, and it accepts supply voltages up to 3 × 480 V AC (+10%), allowing use on common 400 V networks with permissible overvoltage. The copper windings exhibit 0.010 Ω / phase, so voltage drop across the filter remains minimal under nominal load. Dielectric strength is verified by a phase-to-protective-earth impulse of 2700 V DC / 2 s, demonstrating insulation integrity. With a depth of 50 mm, the filter remains compact, and when it carries full load it releases 30 W of heat, a figure used for cabinet ventilation sizing. Leakage current is limited to 10 mA during normal operation, with an upper boundary of 118 mA under worst-case conditions.
The housing measures 352 mm in height and 132 mm in width, so it fits standard control panels without occupying excessive rail space. Motor leads up to 30 m may be routed downstream without exceeding attenuation limits, and safe operation is maintained up to an ambient temperature of 45 °C. Screw clamp terminals sized at 10 mm² / AWG 6 permit direct connection of drive feeders, keeping additional distribution blocks unnecessary. The insulation system also withstands a line-to-line impulse of 800 V DC / 2 s to meet routine production tests. Total mass is 2.5 kg, so the filter can be mounted on DIN rails or backplates without added support hardware.
