16.E5.T60-10F1 KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
11 Seconds
The KEB 16.E5.T60-10F1 is an EMC filter from the Combiline EMC Filters series and supports up to 43 Amps of rated current with a maximum input voltage of 528 V AC. It features three input phases, a C1 EMC class, and a low-leakage IT-HF filter type. The filter has a width of 132 mm, a height of 352 mm, and weighs 2.5 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 16.E5.T60-10F1 is a three-phase electromagnetic compatibility filter produced by KEB within the Combiline EMC Filters series. The component is wired between the plant’s supply network and a frequency converter to attenuate differential and common-mode noise that can disrupt automation equipment. Its role is to keep conducted emissions below legal limits so that motor drives, PLC racks, and measurement devices can operate in the same cabinet without mutual interference while still allowing full power transfer to the load.
It is designed for line voltages up to 400/480 V AC, and its bus bars can carry a continuous current of 43 A without exceeding thermal limits. Compatibility with both 50 Hz and 60 Hz grids is indicated by the 50/60 Hz frequency rating, so the same unit can be used on global installations. The assembly is classified in EMC category C1, meaning it suppresses emissions to levels suitable for residential or light industrial environments. Touch current is limited to 8 mA, which helps when earth leakage allowances are limited. A terminal cross-section of 10 mm² and a weight of 2.5 kg support straightforward cabinet layout.
The filter follows the Low-Leakage IT-HF topology, providing high-frequency attenuation while keeping capacitive coupling to ground minimal. Input withstand capability reaches 528 V AC, giving margin for line overvoltage events during regeneration. When operating at rated load, it dissipates 30 W, so enclosure cooling must handle that heat along with neighboring equipment. Motor leads connected downstream may extend up to 10 m; staying within this length preserves the intended attenuation curve and helps prevent resonances. With a height of 352 mm, width of 132 mm, and depth of 50 mm, the unit fits comfortably on DIN rails or backplates in 600 mm deep control cabinets.
