15.E5.T60-10F2 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 15.E5.T60-10F2 is an EMC filter from the Combiline EMC Filters series with a conductor size of 10 mm² and a duty cycle of 50 percent. It supports three phases, operates at a nominal voltage of 400 to 480 V AC, and has a maximum voltage of 528 V. The filter measures 285 mm in height, 88 mm in width, and 50 mm in depth, with a rated current of 32 A and a weight of 1.5 kg.
Internal Product Review
The 15.E5.T60-10F2 is a KEB Combiline EMC filter designed for 3-phase 400/480 V AC systems. C1 EMC classification and a 32 A rated current make this unit a strong choice for maintaining compliant, stable drive installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 15.E5.T60-10F2 electromagnetic compatibility filter is manufactured by KEB and belongs to the Combiline EMC Filters series. Installed between a variable-frequency drive and the plant supply, the device attenuates high-frequency noise and keeps conducted emissions within regulatory limits. By limiting interference that returns to the mains, it supports reliable operation of motors, sensors, and control electronics that share the same power network in automated machinery. The filter is used on the supply side of the drive, where it acts on conducted noise before that interference spreads through shared wiring.
It is designed for three-phase networks operating at a nominal voltage of 400/480 V AC and can continuously carry up to 32 A without derating. Attenuation remains stable across the common industrial supply spectrum of 50/60 Hz. A leakage current of 5 mA must be considered when selecting residual current devices, while its EMC performance is categorized as C1, indicating suitability for installations that require strict interference limits near sensitive equipment. Internal copper windings and ferrites introduce only 16 W of power loss at full load, so enclosure ventilation demands remain modest. The filter accepts motor leads up to 10 m in length with 10 mm² conductors. Housing D dimensions of 285 mm in height, 88 mm in width, and 50 mm in depth help it fit narrow cabinet spaces beside the drive assembly.
For installations that occasionally experience supply peaks up to 528 V, electrical clearances inside the device remain adequate, provided the average loading respects a 50 % duty cycle. The body mass of just 1.5 kg limits mechanical stress on control-cabinet fasteners and helps simplify panel mounting. Its compact housing leaves room for adjacent power components and cable routing in crowded enclosures. Placement near the frequency converter can also shorten the path over which high-frequency interference travels.
