12.E5.T60-10F1 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 12.E5.T60-10F1 is an EMC filter in the Combiline EMC Filters series that is compatible with IT systems and operates with a rated voltage of 3x480 V AC. It supports three phases, has a rated current of 14 A, and a maximum ambient temperature of 45 °C. The filter features a power loss of 12 W and a leakage current of 4.5 mA.
Internal Product Review
The 12.E5.T60-10F1 is a KEB Combiline EMC filter designed for 3-phase applications on 3x480 V AC systems. C1 suppression and IT system compatibility support clean integration in demanding industrial power networks. A rated current of 14 A makes the unit a strong choice for dependable EMC performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 12.E5.T60-10F1 is an electromagnetic interference filter from the Combiline EMC Filters series manufactured by KEB. It is installed between a three-phase drive and the mains supply so conducted noise is attenuated before it can propagate into the plant power network. By targeting the differential and common-mode components that arise from high-frequency switching, the filter helps keep industrial automation cabinets within allowable emission limits for surrounding equipment.
This unit is specified for a rated line of 3x480 V AC and can continuously carry up to 14 A under typical plant duty cycles. Its design remains compatible with either 50 Hz or 60 Hz grids, as shown by the 50/60 Hz frequency range, while overvoltage events up to 528 V AC are tolerated without dielectric breakdown. Internal winding topology and magnetic core dimensions result in only 12 W of self-heating at full load, which helps limit cabinet thermal rise. The filter belongs to suppression class C1, which applies to category 1 installations. Mechanical dimensions of 249 mm in height, 88 mm in width, and 40 mm in depth allow side-by-side mounting on DIN rails, and the housing is suited for IT power systems that lack a solidly grounded neutral.
Leakage current does not exceed 4.5 mA, permitting the filter to be used on personnel-protected circuits without nuisance ground-fault trips. The aluminum enclosure weighs 1.3 kg, so it can be fixed directly onto lighter sheet-metal panels. Ambient service is permitted up to 45 °C without derating when natural convection is available around the fins. A C1-validated motor cable length of 10 m is supported, so attenuation targets can be maintained across typical cabinet-to-machine distances while preserving the unit's low power loss and compact form.
