10.U5.B0B-1010 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.U5.B0B-1010 is part of the Combiline EMC Filters series and supports a rated input voltage of 240 V with a rated current of 22 Amps. This filter is classified with an EMC limit class C1 and can operate at a maximum switching frequency of 16 kHz. It weighs 0.9 kilograms and allows for a maximum motor cable length of 10 meters.
Internal Product Review
The 10.U5.B0B-1010 is a KEB Combiline EMC filter designed for 240 V input systems and a 22 A rated current. C1 EMC limit class and a 16 kHz maximum switching frequency support clean, stable operation in demanding drive applications. A 45 °C maximum ambient rating makes the filter a strong choice for controlled industrial environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.U5.B0B-1010 is an EMC suppression module manufactured by KEB as part of the Combiline EMC Filters series. Designed for drive and motor installations, the filter connects at the inverter output to limit conducted interference and reduce radiated emissions along the motor leads. By providing additional attenuation beyond the drive’s internal circuitry, it helps installations meet harmonic and radio-frequency disturbance limits within industrial automation cabinets.
It operates at a rated line voltage of 240 V, allowing direct connection to common single-phase or split-phase supplies used with compact variable-frequency drives. The input stage handles a continuous current of 22 A, matching inverters that feed fractional-kilowatt and lower midrange motors. The module can operate at ambient temperatures up to 45 °C. Within this temperature limit, the filter dissipates only 20 W of heat, so standard enclosure ventilation is usually sufficient. For pulse-width-modulated outputs, the design maintains effective attenuation at carrier frequencies up to 16 kHz, ensuring stable differential-mode impedance when modern drives operate at elevated switching rates to minimize audible motor noise.
Compliance with C1 emission limits makes the filter suitable for installations where stringent residential or light-industrial electromagnetic criteria apply. Cable-routing flexibility is preserved because the filter supports motor leads up to 10 m while retaining the stated attenuation profile. The housing satisfies climatic category 3K3, supporting operation in control rooms that experience moderate humidity and occasional temperature variation without condensation. The compact unit weighs 0.9 kg, allowing it to be mounted beside the drive without imposing a significant mechanical load on panel structures. Its output-side placement also helps control high-frequency interference close to the source before unwanted electrical noise can travel along connected motor cabling.
