10.E5.T60-1002 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.E5.T60-1002 is an EMC filter from the Combiline EMC Filters series, supporting three phases and designed for a rated voltage of 400/480 V AC with a rated current of 8 Amps. It features a maximum input voltage of 528 V AC, works at 50/60 Hz, and offers a suppression class of C1. The filter has a conductor size of 4 mm², weighs 1.3 kg, and measures 285 mm in height, 88 mm in width, and 40 mm in depth.
Internal Product Review
The 10.E5.T60-1002 is a KEB Combiline EMC filter engineered for 3-phase systems with a rated voltage of 400/480 V AC. Suppression class C1 and an 8 A rated current make this filter a strong choice for dependable EMC control in drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.E5.T60-1002 is an electromagnetic compatibility line filter manufactured by KEB within the Combiline EMC Filters series. Installed between the plant mains and a variable-speed drive or servo amplifier, it blocks high-frequency noise from leaving the cabinet and helps shield incoming conductors from drive-generated interference. This supports reliable fieldbus communication, and its terminals accept 4 mm² copper wire for typical cabinet connections. By reducing conducted noise on shared supply lines, it also helps nearby control equipment operate with fewer interference-related disturbances.
During continuous operation, the filter passes a load current of 8 A, so drives drawing that RMS value will not saturate its inductive elements. The permissible network voltage is 400/480 V AC, and brief excursions up to 528 V AC can be tolerated without dielectric breakdown. That voltage range matches common industrial power systems used with small and mid-power drives. It is designed for a three-line supply, and the 3-phase rating means the conductors share a common attenuation path tuned for 50/60 Hz mains frequency. With a leakage current of 15 mA, the filter requires a ground connection that helps prevent nuisance tripping of sensitive residual-current devices while still discharging internal capacitors after power is removed.
Total dissipation is 7 W, so normal convection inside the enclosure is sufficient when 40 mm of clearance is kept around the housing. The aluminum chassis measures 40 mm deep, 88 mm wide, and 285 mm high, giving a narrow footprint for side-by-side DIN-rail mounting. A maximum motor lead of 30 m can be routed downstream of the filter without compromising the intended attenuation curve. Suppression classification C1 places the unit in a high-performance category for equipment installed close to public low-voltage networks. At a mass of 1.3 kg, the assembly can be supported by standard panel hardware without additional brackets.
