10.E5.T60-1001 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.E5.T60-1001 is part of the Combiline EMC Filters series and is designed for 3-phase plus PE systems with a voltage class of 400/480 V AC and a rated current of 8 amps. This filter supports a maximum input voltage of 528 V AC, a maximum ambient temperature of 45°C, and a motor cable length of up to 30 meters. The unit measures 249 mm in height, 88 mm in width, and 40 mm in depth, and weighs 1.3 kg.
Internal Product Review
The 10.E5.T60-1001 is a KEB Combiline EMC filter engineered for 3-phase + PE systems with a 400/480 V AC voltage class. Clean suppression performance and straightforward drive integration stand out, supported by a C1 suppression degree and 50/60 Hz rated frequency.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.E5.T60-1001 is an EMC line filter produced by KEB within the Combiline EMC Filters series. Installed between an inverter and the plant mains, the device attenuates conducted emissions so surrounding drives and control electronics meet electromagnetic compatibility limits. It is intended for three-phase installations in industrial automation where compact filtering is preferred over external shielded cabling. By intercepting common-mode noise, it also lowers leakage currents that could otherwise trip residual current devices.
Electrically, the filter is designed for 8 A of continuous line current on a three-phase + PE network. Its insulation and internal capacitors are rated for the 400/480 V AC voltage class, while functional tests approve operation up to 528 V AC without saturation. A fundamental supply frequency of 50/60 Hz is supported, making the unit suitable for global grids. Compliance with interference category C1 means it suppresses noise to the most demanding first-environment limits, and a leakage current of 15 mA remains below thresholds that commonly cause upstream protective devices to trip. The specified conductor size of AWG 10, equivalent to a 4 mm² wiring cross-section, matches the filter’s internal terminals and keeps temperature rise within limits on its copper path.
Mechanical proportions aid enclosure layout. The housing measures 88 mm wide, 40 mm deep, and 249 mm high, yet weighs only 1.3 kg, so cabinet rail mounting adds little mass. Thermal dissipation is limited to 7 W under nominal load; therefore, the filter can operate in ambient temperatures up to 45 °C without forced cooling when clearance is provided. Motor leads up to 30 m may be connected downstream without exceeding the filter’s design impedance, and the terminal layout accommodates three-phase conductors and a protective earth connection.
