07.E5.T60-0061 KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
7 Minutes
15 Seconds
The KEB 07.E5.T60-0061 is an EMC filter from the Combiline EMC Filters series with a rated current of 12 Amps and a maximum operating voltage of 264 V AC. This single-phase filter supports a maximum ambient temperature of 45 degrees Celsius and a wire size of 4 mm². It measures 249 mm wide, 88 mm long, and 40 mm high from the base, and weighs 0.9 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
KEB’s 07.E5.T60-0061 belongs to the Combiline EMC Filters series and is intended for use ahead of single-axis inverters or small variable-frequency drives in industrial automation. As an electromagnetic compatibility filter, it is installed between the mains supply and a drive controller. It attenuates conducted noise and helps protect sensitive control electronics while supporting compliance with emission limits.
The filter accepts a 1-phase supply and carries a continuous load of 12 A, while its insulation system is cleared for up to 264 V AC line potential. During operation, only 3.4 mA of leakage current flows to ground, reducing nuisance RCD trips. Internal dissipation is limited to 5 W, so enclosure heating remains modest at full load. With a suppression degree classified as C1, the unit meets stringent conducted-noise limits for residential and light-industrial environments. Safety evaluation under UL gives an alternative current limit of 8 A. The housing spans 249 mm in width, 88 mm in total length, and 40 mm in height from the mounting base, allowing placement in shallow control cabinets. Terminals accommodate wiring up to CCA 4 mm² and the design supports motor leads as long as 10 m.
The assembly weighs 0.9 kg, which is light enough for DIN-rail or direct panel mounting without extra bracing. Continuous operation is permitted in ambient temperatures up to 45 °C, matching the 3K3 climatic category, which also covers acceptable humidity and vibration levels. A maximum motor cable reach of 10 m is supported, which helps contain differential-mode noise at the drive end. Field wiring is made with conductors up to 4 mm², ensuring low resistive loss at the stated currents. This filter is suitable for compact machine tools, packaging equipment, and conveyor modules.
