00.58.425-4130 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 00.58.425-4130 belongs to the Combiline EMC Filters series and is designed for a rated drive power of 5.5 kW with a rated voltage of 400 V AC. It handles a rated current of 12 A and a maximum current of 21.6 A, supporting conductor sizes up to 4 mm². The filter measures 250 mm in depth, 171 mm in height, and 160 mm in width, with a total weight of 5.3 kg.
Internal Product Review
The 00.58.425-4130 is a KEB Combiline EMC filter engineered for clean drive integration at 12 A and 400 V AC. A 21.6 A max current and 800 Hz max output frequency provide useful headroom for demanding variable-speed applications. For 5.5 kW drive systems, 30 W power loss supports efficient filtering and makes the unit a strong choice for dependable EMC control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 00.58.425-4130 electromagnetic compatibility filter belongs to the Combiline EMC Filters series from KEB. Installed between the mains supply and an inverter, the unit suppresses conducted high-frequency noise so that surrounding sensors and control boards are not disturbed. By limiting the return of switching harmonics onto utility lines, it helps drive systems meet industrial emission limits and maintain stable fieldbus communication.
Electrical ratings define the operational envelope of this filter. It is designed for a line voltage of 400 V AC, matching the supply commonly used on three-phase automation equipment. Under continuous duty the device conducts a steady phase current of 12 A, which corresponds to inverter systems with a nominal shaft output of 5.5 kW. For transient over-voltage events the internal winding insulation tolerates up to 530 V without breakdown, while its laminated iron core and choke geometry let it pass short-duration peaks of 21.6 A so that braking or acceleration pulses do not saturate the inductance. These limits ensure that switching spikes from pulse-width-modulated drives are filtered without overheating the copper conductors.
Thermal and mechanical characteristics support cabinet integration. The filter dissipates up to 30 W during steady operation, so the 250 mm-deep, 160 mm-wide, 171 mm-high housing must be mounted where airflow can remove heat. Internal bars accept supply and motor leads with a cross section of 4 mm², enabling direct connection to IEC power terminals. Because the magnetic path is built with 1.6 kg of copper, the assembly reaches a total mass of 5.3 kg, which is light enough for DIN-rail or back-plate installation without additional supports. The filter keeps attenuation effective up to a switching frequency of 800 Hz, aligning with modern high-carrier drives that generate wider harmonic spectra. Together, these construction details allow the unit to preserve compliance while occupying minimal panel space.
