FC-103P5K5E21H2XXX7XXSXXXXAZBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-103P5K5E21H2XXX7XXSXXXXAZBXCXXXXDX is part of the VLT FC 103 Refrigeration Drives series and has a power rating of 5.5 kW and 7.5 horsepower. It operates at a mains voltage of 200 to 240 VAC and features smooth imperial cable entry with a non-coated PCB.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-103P5K5E21H2XXX7XXSXXXXAZBXCXXXXDX drive is manufactured by Danfoss for variable-speed control of refrigeration compressors, condensers, and evaporator fans. It belongs to the VLT FC 103 Refrigeration Drives series, which is designed for low-voltage, three-phase motors used in commercial and industrial cooling equipment. By modulating the frequency and voltage supplied to the motor, the drive helps maintain target suction or discharge pressures while reducing unnecessary electrical consumption. This operating approach suits supermarket refrigeration racks, cold rooms, ice machines, and other systems with changing cooling demand.
The input section accepts a three-phase supply of 200–240 VAC, making it compatible with common 50 Hz or 60 Hz electrical service. The inverter can deliver up to 5.5 kW at its output terminals, corresponding to 7.5 HP for an induction motor operating at nominal speed. The drive has no brake chopper, so regenerative energy produced during rapid deceleration must be managed by external equipment or avoided through the selected stopping profile. Cable routing uses a smooth imperial cable entry with knockouts sized for conduit systems commonly used in North America. This entry arrangement allows power, motor, and control wiring to be routed into the enclosure without requiring a separate metric conversion plate.
The electronics are assembled on an uncoated printed circuit board, so the drive should be protected from condensation, corrosive vapor, and excessive airborne contamination. The absence of a C1 filter option means that installations requiring EN 61800-3 category C1 compliance must use a suitable external line filter. Proper cable shielding, grounding, and separation of power and signal conductors can also help control electromagnetic interference within the installation. The lack of an integrated mains option requires disconnects, fuses, and contactors to be installed separately in the control cabinet when the application calls for them. These external devices must be selected according to the incoming supply, motor load, and applicable electrical protection requirements.
