FC280P1K5T4E21H2BNCXXXSXXXXAX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
5 Seconds
The Danfoss FC280P1K5T4E21H2BNCXXXSXXXXAX belongs to the VLT FC 280 Midi Drives series and is a midi drive with a rated power of 1.5 kW and an output power of 2.6 kVA at 400 V. This drive offers a supply voltage of 3 x 380/480 V AC, has an enclosure rating of IP21/Type 1, and includes a Modbus RTU integrated fieldbus. It is 294 mm high, 75 mm wide, 168 mm deep, and weighs 4.0 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC280P1K5T4E21H2BNCXXXSXXXXAX is an AC variable frequency drive manufactured by Danfoss for the VLT FC 280 Midi Drives series. As a member of the Midi Drive FC product group, the unit supplies speed-controlled power to three-phase induction motors used in conveying, pumping, and general process equipment. Its built-in brake chopper and motor control algorithms allow a controller to decelerate loads quickly while maintaining torque regulation. The drive is supplied without a factory-installed mains option, making it a compact choice where cabinet space is limited and dynamic braking is required.
The power section is designed for a line input of 3 x 380/480 V AC, so it connects directly to common industrial networks without a step-up transformer. Under those conditions, it delivers a rated motor output of 1.5 kW and an apparent output of 2.6 kVA while supplying a continuous phase current of 3.4 A. Maximum supply demand is 2.9 A, which helps keep upstream circuit-breaker requirements modest. Internal switching and cooling losses total 53 W, supporting efficient operation during continuous duty. An IP21/Type 1 enclosure permits indoor mounting while protecting internal components against accidental contact and vertically falling water drops. Class A2 (C3) RFI filtration limits conducted emissions on the mains, and the wiring lugs accept conductors up to 4 mm². The drive uses an uncoated printed circuit board and does not include a factory adaptation.
The K-series housing is 75 mm wide and 168 mm deep, with a height of 294 mm, allowing installation in shallow control panels. The assembly weighs 4.0 kg, so it can be secured to light-gauge backplates without additional reinforcement. A native Modbus RTU interface provides parameter access over shielded twisted-pair wiring without requiring an external gateway. The K1 frame accepts standard shielded motor cable and provides a compact mounting footprint for space-limited industrial control cabinets.
