Product Description:

The FC-280PK75T2H2BNCXXXSXXXXAN is a variable frequency drive from Danfoss and is part of the VLT FC 280 Midi Drives series. It converts fixed utility power into a controlled output waveform so that asynchronous motors can track process demands in factory automation, packaging lines, and light material-handling stations. By varying output frequency and voltage, it allows smoother starts and controlled speed changes during routine machine operation. The drive uses the same mechanical platform found across the series, which helps maintain a consistent panel footprint. It is supplied as a standalone chassis for panel installation and connects directly to field input and output terminals.

The drive has a continuous power rating of 0.75 kW, which corresponds to 1.0 HP at the motor shaft. The input section accepts three-phase 200-240 VAC, allowing operation on standard low-voltage distribution networks without an autotransformer. The unit has no brake chopper, so rapid deceleration must rely on motor losses or an external mechanical brake. Operator interaction is limited because the front fascia has no display, so setup requires a remote keypad or fieldbus commands. Any detailed parameter access therefore comes through external interface hardware rather than a built-in local panel.

Two expansion placeholders are present, yet both Adaptation A and B are delivered with no adaptation, leaving all factory jumpers in their default positions for general-purpose control tasks. The control board uses a non-coated PCB, so installation should avoid corrosive vapors or high airborne moisture. The unit belongs to the Midi Drive FC group and carries the family identifier 280. With the standard control arrangement left in place, the drive is suited to general-purpose motor control where optional plug-in boards are not required.