FC-280P5K5T4H2BNCXXXSXXXXAX

Product Description:

The FC-280P5K5T4H2BNCXXXSXXXXAX is a durable and resilient VLT automation converter manufactured by Danfoss. It supports both permanent magnet and brushless servo motors and functions at a wide operating range. Based on Danfoss’ documentation, the FC-280P5K5T4H2BNCXXXSXXXXAX works best when connected at a three-phase supply voltage of 380 to 480 volts. At this terminal supply voltage, the converter delivers a typical shaft power output of 5.5 kilowatts, or approximately 7.4 horsepower. This converter also comes with an advanced H2 RFI filter that seamlessly blocks noise from nearby electromagnetic signals. At the rated shaft output, the connected motor can reach a terminal voltage up to 100% of the mains voltage and a starting torque of 160% of the rated value for sixty seconds.

Although the FC-280P5K5T4H2BNCXXXSXXXXAX is designed to work at a supply voltage range of 380 to 480 volts, it can tolerate a maximum deviation of -10 or 10% from the nominal. Below the tolerance range, the converter will experience a linear decrease in its performance. For instance, at a mains supply voltage of -15%, the FC-280P5K5T4H2BNCXXXSXXXXAX will exhibit 85% of rated performance. Applying a higher voltage supply, however, should not be attempted because the protection circuit for the converter may trigger at overvoltage conditions.

When the FC-280P5K5T4H2BNCXXXSXXXXAX’s shaft achieves a power output of 5.5 kW, the corresponding continuous current is around 15.1 amperes. At this operating condition, the converter’s overall efficiency is around 97.8 percent with an estimated power loss of 157.5 watts. Like other FC-280 converters manufactured under the VLT series, the FC-280P5K5T4H2BNCXXXSXXXXAX can tolerate an ambient temperature range of 32 degrees Fahrenheit to 113 degrees Fahrenheit. Wake Industrial generously offers this advanced frequency converter with a special one-year item warranty.